Showing posts with label tracked vehicle. Show all posts
Showing posts with label tracked vehicle. Show all posts

Sunday, January 14, 2018

Marders to Jordan (part 2)

The German company Rheinmetall announced on the 13th December 2017 that the Kingdom of Jordan is set to receive a second batch of 25 second-hand Marder 1A3 IFVs, that were originally operated by the German Army. The delivery of the vehicles will start in the first quarter of 2018. A first batch of a total of sixteen Marder 1A3 IFVs was already handed over to the Royal Jordanian Army in December of 2016.

Marder 1A3s of the first batch delivered to Jordan
The Marder 1A3 is an infantry fighting vehicle (IFV) currently in service with the armed forces of Chile, Germany, Indonesia and Jordan. The Argentinian military operates the TAM family, which is based on the Marder design. The Marder IFV is armed with a 20 mm MK 20 Rh 202 gas-operated autocannon with a maximum rate of fire ranging between 800 and 1,000 rounds per minute. As secondary armament the vehicle is fitted with a 7.62 mm MG3 machine gun and a launcher for the Milan anti-tank guided missile (ATGM). The Marder's propulsion is provided by a liquid-cooled MB 883 V6 engine from MTU, which delivers 600 horsepower at 2,200 rpm. It is coupled to a semi-automatic RENK HSWK 194 transmission. The Marder 1A3 has a combat weight of about 33.5 metric tons and reaches a top-speed of 65 kilometres per hour (km/h). Its spaced armor provides all-round protection against fire from 12.7 and 14.5 mm heavy machine gun, while the frontal arc is protected against medium calibre ammo including 30 x 165 mm armor-piercing ammunition. The Marder 1A3 is not fitted with an underbelly armor plate for protection against mines and improvised explosive devices (IEDs).

The Royal Jordanian Army is receiving the German-made IFVs as part of a military aid, which was started by the Federal Republic of Germany in the last two years in an attempt to improve the stability of the region by enabling the militaries of some Middle Eastern countries to fight better against insurgents and terrorists. Aside of a first batch of Marder 1A3 IFVs, Jordan also has received 600 RGW-90 hand-held recoilless guns, surveillance equipment, 56 vans and 70 trucks. Like the first batch of Marders, the second one was also ordered by the German government, rather than being ordered by Jordanian officials. Rheinmetall states that the contract - awarded in October 2017 - has a total value of more than €17 millions and includes completely refurbishing the vehicles to a (near) mint condition, painting them with a desert camouflage pattern (understood to be similiar to the single-tone "desert yellow" used on many US combat vehicles), spare parts, ammunition and tools, technical documentation aswell as support and training for the crews and local maintenance personnel.
Originally it was planned to deliver all 50 Marders meant for Jordan until end of 2017. There currently is no official explanation for the delay, it might however be related to politicians having troubles allocating the budget for the deal or the negotiations with Rheinmetall taking longer than expected.

An upgraded Marder 1A3 could be fitted with additional armor, an unmanned turrets and a more powerful engines.
There are a number of upgrade possibilities to enhance the protection, firepower and mobility as well as options to reconfigure the Marder to another role. The Marder can be used as APC, light/medium tank, tank destroyer, surface-to-air missile carrier, fire support vehicle, command post vehicle, ambulance vehicle, fire-fighting vehicle and as mortar carrier. Different upgrade paths such as the Marder CCV and the Rheinmetall Lynx infantry fighting vehicle have already been mentioned in the blog post regarding the first transfer of Marders to the Royal Jordanian Army.

Saturday, December 16, 2017

Addendum: Puma IFV performance in Czech trials

The latest issue of the InfoBrief Heer, a newsletter from the Förderkreis Deutsches Heer e.V., includes an article on the performance of the Puma infantry fighting vehicle (IFV) in the Czech trials written by Mathias Kraus, Head of Sales and Marketing of the company Projekt System & Management GmbH (PSM). The Förderkreis Deutsches Heer e.V. is a club and lobby group consisting of members of the military, politics and industry that is focused on the German land forces and its military procurements. PSM is a joint-venture between Krauss-Maffei Wegmann (KWM) and Rheinmetall, the two companies that together manufacture the new IFV and various other armored fighting vehicles (AFVs).
 
Puma climbing a slope during the Czech trials
According to the article, the trials consisted of three parts: static trials, dynamic trials and firing trials. Static trials were focused on gathering data regarding size, weight, ergonomy, protection, armament and optics. The dynamic trials included driving along a test track and determining factors affecting the mobility of the vehicle, such as top speed on road and cross-country, maximum fording depth, the ability to drive along (side) slopes and the ability to climb over smaller obstacles. The firing tests included firing at targets at a distance of 1,200 and 1,800 metres. Given the armament and optics of modern infantry fighting vehicles, this is far below the maximum effective range of the 30 x 173 mm guns used on all of the tested IFVs (the German Army requirement for the Puma was an effective gun range of 3,000 metres), but it might be a valid representation of the combat range expected in the Czech Republic; during the Cold War the average distance for tank-vs-tank combat in Central Europe was estimated to be between 1,000 and 2,000 metres according to different studies from NATO and Warsaw Pact countries.

IFV Production line in Germany
Each IFV fired a burst of five rounds against each target; therefore each contender for the BMP-2 replacement fired overall 40 shots on eight targets that had to be hit. At the day of the firing tests, the weather was supposedly extremely windy, making it rather hard to hit the targets. The Puma IFV missed three shots and hit all of the other 37 rounds, thus every target was hit more than once, most of them were hit five tims. The other contenders - BAE Systems' CV90 in two variants, the ASCOD 2 from General Dynamics and Rheinmetall's Lynx IFV - all missed at least one of the targets. In fact Mr. Kraus claims that the second best IFV managed to score only about half as much hits as the Puma, which based on the other information should be about 18 to 19 hits on targets.
Due to the high complexity and sophistication of modern armored fighting vehicles, relability is often a problem, specifically if it is an untested AFV or new variant of an existing design. In case of the Czech trials, except for the Puma - the only IFV tested in a production variant - all IFVs had some sorts of issues with the reliability of some major components. The ASCOD 2, both CV90 variants and the Lynx all had to repeat at least one of the tests, because parts broke down or malfunctioned. That doesn't mean that the Puma IFV had no issues - it only means that there weren't any major troubles during the tests that required the components. Smaller/less important parts of the IFV still might have failed, as the statement from the article only speaks about the reliability of components relevant to the tests.
A difference between the Puma and the other contenders was the fact that the former was a production vehicle for the German Army, fitted with all equipment and tools required by the military. This included a battlefield management system and radios, which were absent on (some of) the other IFVs tested as BMP-2 replacement.

Model of a pre-series Puma IFV with MELLS
Already a long time before the trials, the governments of Germany and the Czech Republic decided to deepen their defence cooperation. On the 15th of February 2017 the ministers of defence of both nations signed a memorandum of understanding regarding this topic, which also includes the Czech 4th Rapid Deployment Brigade being subordinated to the German 10th Tank Division. Last but not least one should not forget that the source of this information: the head of sales from PSM should hardly be considered an impartial observer; still there are reasons to believe that he didn't blatantly lied or greatly exaggerated the performance of the Puma and the problems of the other contenders. In the end 50% of the company PSM is owned by Rheinmetall, which offered the Lynx IFV as alternative to the ASCOD 2, CV90 and Puma. Thus if Mr. Kraus lied in regards to the lower accuracy and reliability of the other options, he also would have lied about the Lynx which most likely would result in him loosing his job (negatively reporting in the press about a product from the company that writes part of your paychecks won't make your employer keep you).
Meanwhile the MELLS dual-missile launcher for the Spike-LR anti-tank guided missiles (ATGM), which should be compatible with the improved Spike-LR II due to both variants of  using the same interfaces, is being tested in the WTD 41 technical centre in Germany.

Wednesday, November 29, 2017

Eastern European AFV program updates


The military of Slovakia has chosen the Patria AMVXP (extra payload) as the new 8x8 wheeled vehicle. The AMVXP is an improved variant of the original Armored Modular Vehicle (AMV) with a raised maximum gross vehicle mass of up to 30 metric tons according to Patria's current data sheet, 13 tons of which are payload that can be used for installing heavier armor packages, mission kits or new weapon stations. Other sources mention a larger maximum gross vehicle mass of 31 or 32 metric tons. The vehicle is powered by a 450 kW (603 hp) Scania diesel engine linked to a 7+1 gear automatic transmission. It features a fully independent double wishbone suspension, an integrated terrain control system and a central tyre inflation system.

Patria AMVXP in an APC configuration
The Slovakian Army will use the AMVXP as an infantry fighting vehicle (IFV) fitted with the Turra 30 turret from local manufacturer EVPÚ. This unmanned turret is armed with a 30 mm autocannon - either a Soviet-design 2A42 gun or a Mk-44 Bushmaster II from Aliant Techsystems - a coaxial machine gun and a dual missile launcher for anti-tank guided missiles (ATGMs). Self-defence is provided by limited amounts of passive bolt-on armor aswell as eight smoke-grenade dischargers. The Turra 30 features a single main optic incorporating a laser rangefinder, a camera and a thermal imager. There is no independent optic for the commander, thus the turret is not enabling operating in a hunter-killer mode. This turret was also offered on the BVP Šakal modernization for the BMP-2.
The unmanned Turra 30 turret will be fitted to the vehicle
The Slovakian military has plans to order a total of 81 AMVXP vehicles, that will be delivered between 2018 and 2024. Prime contractor for the deal is Konštrukta Defence A.S., other contractors include Patria Land Systems and EVPÚ. Previously the country had ordered about thirty AMV vehicles in a variant made under licence by the Polish company Rosomak S.A.. These vehicles also were set to recevie the Turra 30 turret and were nicknamed Scipio; maybe this name will be retained. The deal was canceled for unknown reasons, apparently the Patria AMVXP hulls will be manufactured in Finland rather than in Poland.



227 Piranha 5 vehicles will be operated by the Romanian military in the future.
The Romanian news website hotnews.ro has reported that the German company Rheinmetall is still trying to sell the Agilis vehicle to the Romanian military. Previously there were no details revealed on the state of this program - following the decision of the Romanian government to start the licence production of 227 Piranha 5 vehicles in the Uzina Mecanica Bucuresti plant in Bucarest, a site operated by the state-owned company Romarm, one had to consider that this possibly meant the end of the Agilis.

The Agilis APC is fitted with a Lance MTS turret
Rheinmetall plans the production of about 400 of the Agilis vehicles via the company Romanian Military Vehicle Systems S.A., a joint-venture between Rheinmetall (50%) and the Ministry of Economy (50%) of the Eastern European country. Originally more than 600 Agilis vehicles were planned, but the adoption of the Piranha 5 reduces the required number of new vehicles. The factory of Romanian Military Vehicle Systems S.A. is located in the town of Moreni and would also assemble MAN military truck, if Rheinmetall's bid to provide the next truck system to Romania is successful. The Agilis contains 87% locally manufactured components, some of which are derived from the previous SAUR vehicle projects - the design is said to also include some features from the Dutch-German Boxer vehicle; only the engine, transmission and some parts of the Rheinmetall-designed drivetrain have to be imported. The chassis is expected to be assembled in the Moreni plant. The fact that all intellectual property of the vehicles remains in Romania is one of the reasons why the Agilis could be easily exported to other countries.
The Agilis program could create a further 420 jobs in the Romanian defence industry; 120 jobs in the joint-venture and up to 300 jobs in the Moreni plant. While Rheinmetall is still pushing for the Agilis, the final decision has to be made on the side of the Romanian government. At the end of the year the Romanian Ministry of Finances has to agree with the funding for the Agilis development, which would take some €234 million for a period of three years. The first vehicles could then be delivered in 2020, after a public tender would be held and a contract would have been signed. Local production would last until 2029, if no follow-up contract is signed. The vehicles are then expected to last to 2055 or beyond.

At least six variants of the Agilis are planned
According to current projections, the Agilis 8x8 wheeled vehicle will serve in at least six different variants within the Romanian army. These variants are an armored personnel carrier (APC), which however is expected to be fitted with a 30 mm gun turret and therefore might be considered to be an infantry fighting vehicle instead, a mobile command post variant, a medevac ambulance vehicle, a CBRN variant, a recovery version featuring a 3 metre long crane cabale of lifting a 5 ton heavy object and two 11 ton hydraulic winches, and a mortar variant with a 120 mm mortar located in the rear compartment.

Features of the Agilis
The Agilis vehicle is 8.02 metres long and 2.99 metres wide (excluding the side-view mirrors) while being 2.5 metres tall in the APC variant. The vehicle is powered by a 612 horsepower diesel engine from the German manufacturer Liebheer, that is linked to a ZF transmission. The ground-clearance is projected to be 430 milimetres. The top speed of the Agilis is expected to exceed 100 kilometres per hour on road, while the road range is more than 800 kilometres. The vehicle can climb 60% slope and drive on 30% side-slope. The vehicle is designed with a turn radius of 9.5 metres. The Agilis is an amphibious vehicle, although depending on armor package and mission kit the vehicle might loose this capability.

The Agilis is fitted with modular armor providing a limited amount of protection in the basic configuration.
The vehicle is protected by modular composite armor, although the basic armor package is designed to provide ballistic protection against small arms fire only - earlier sources suggest protection according to the STANAG 4569 level 2 or level 3 standard. The high ride and a composite floor plating are to provide decent protection against mines and improvised explosive devices (IEDs) of unspecified size. While it has not revealed which type of armor is to be used on the Agilis, it seems reasonable to assume that Rheinmetall's own VEHRA (Versatile Rheinmetall Armour) or the AMAP/ProTech composite armor designed by IBD Deisenroth, which is manufactured by Rheinmetall Chempro, is to be used to protect the vehicle. 
While the older Agilis designs saw the APC/IFV variant armed with a 25 mm gun only, the latest suggestions include a 30 mm autocannon with 150 rounds of main gun ammo and a 7.62 mm machine gun with 400 rounds ready-to-fire ammunition for the APC/IFV. These weapons are located in Rheinmetall's two-men Lance Modular Turret System (MTS), which is fitted with two set of SEOSS sights - while the graphics show only a SEOSS for the gunner, the text speaks of an independent optic for the commander aswell. The Lance turret is also offered on the Boxer CRV/IFV and the tracked Lynx IFV. It was chosen a few years ago by the Spanish marines for use on the Piranha IIIC. The digital SEOSS sight includes a two-axis stabilization, a third generation SAPHIR thermal imager, a laser-rangefinder and a daysight CCD camera.
The APC/IFV variant has a crew of three (commander, driver and gunner) and carries seven dismounts. The command post variant has a crew of two and carries five dismounts/further soldiers. All other variants have a crew of four.


As detailed by the Czech military news website/blog Armádní Noviny, the negotiations on buying the Puma IFV are going on. The main German companies responsible for developing and manufacturing the Puma have met with representatives of more than 30 potential Czech partner companies in the Diplomat hotel in Prague to discuss possible work-share and future cooperation in the military vehicle industry. According to PSM Projekt System & Management GmbH, the joint-venture between Krauss-Maffei Wegmann (KMW) and Rheinmetall that manages the Puma project, a cooperation in the manufacturing process of the Puma IFV would result in a gain of know-how and could also lead to future cooperations in projects like the Boxer APC, the Leopard 2 main battle tank and the Panzerhaubitze 2000, vehicles that the Czech Army might want to buy in the future.

Puma IFV during the Czech trials.
Czech sources mention that in theory about 35 billion Czech koruna (about €1.3 billion) worth of contracts could be awarded to local companies in case of the Puma being chosen as new infantry fighting vehicle. Given that the Puma supposedly outperformed all other alternatives, the key problem remains the budget - the acquistion of new IFVs is planned to cost only half of the 50 billions Czech koruna (€1.916 billion) budget, but the price for 210 new Puma IFVs, spare parts, training, simulators and other services is understood to exceed this amount of money.

Sunday, October 1, 2017

Russia upgrades BMP-2 and BMD-2 IFVs

The Russian Army has contracted the KPB Tula Instrument Design Burea for the upgrade of 540 old BMP-2 and BMD-2 infanty fighting vehicles (IFVs). The complete scope of the upgrade is not known, but it is confirmed that both vehicles will receive upgraded turrets - or "combat modules" in the official Russian military lingo. The BMP-2 will be fitted with the B05Ya01 Berezhok combat module, while the BMD-2 will receive the lighter Bereg combat module.
In theory further improvements could be part of different contracts with other companies, but it seems unlikely that the Russian Army is interested in adopting a heavier armor package or fitting a new engine to these vehicles - it would require large amounts of additional money, which instead can be invested into the development and manufacturing of the next-generation of armored fighting vehicles (AFVs) including the T-14/15 Armata, the Kurganets-25 and the Bumerang wheeled vehicle.
Last year in 2016, the Russian Army contracted the 163rd Armor Repair Plant to overhaul a small quantity of existing BMP-2 IFVs. Overall the company is set to upgrade a total of 327 BMP-2s in the timeframe from 2014 to late-2018. Other comapnies such as the 103rd, 144th, and 560th Armor Repair Plants are also refurbishing existing BMP-2s, boosting the overall number to at least 586, which means that not all of these vehicles will receive the new turret upgrades from KPB Tula.

BMP-2 with combat module "Berezhok" shown in Russian TV
In 2014 the Algerian Army ordered a total of 340 Berezhok turrets for upgrading old BMP-1s and BMP-2s to a more modern standard. These vehicles - apparently designated BMP-1M and BMP-2M, but not to be confused with the Ukranian BMP-1M upgrade - might also feature a larger powerpack such as the UTD-23 engine with 370 horsepower output, aswell as newer types of ammunition. In 2017 a prototype of the 8x8 Bumerang wheeled vehicle fitted with the Berezhok combat module instead of the Bumerang-BM unmanned turret was demonstrated during a military exhibition, although the latter system is commonly believed to be superior.

The Berezhok turret features multiple weapons and a new FCS
The Berezhok turret upgrades retains the 2A42 autocannon - chambered in the 30 x 165 mm calibre - as main armament, but features enhanced secondary armament and a new state-of-the-art fire control system (FCS). This new fire control system enables the IFV to engage targets while being stationary or on-the-move with a high accuracy, it also enhances the capabilities of the IFV against air-targets such as low-flying helicopters.
The FCS now includes two separate optics for commander and gunner. The gunner's sight is fixed to the turret and stabilized in two planes. It offers different magnification levels, which result in a field of view ranging from 20° to 4° depending on zoom level. The sight also includes a thermal imager, but no performance data regarding its sensor resolution or technological generation have been revealed by KBP Tula. Given that most Russian vehicles upgrades make use of optics from the Belarussian manufacturers, which incorporate Catherine thermal imaging modules from the French company Thales, one should expect a rather high quality. KBP Tula's local competitor, Kurganmashzavod is offering BMP-2 and BMP-3 upgrades incorporating thermal imagers from SAGEM, another French company. The integrated laser rangefinder used in the Berezhok's gunner sight has a minimum range of 200 metres and a maximum range of 10,000 metres. The gunner's sight is also used to guide the laser beam-riding Kornet missiles. According to KPB Tula, the RMS error of the sight's stabilization is smaller than 0.1 milliradian. The optic has a boresight laying angle of -15° to +30° in the vertical plain and an angle from -10° to +10° in the horizontal plain.

The upgrade includes new optics, stabilizers, sensors and computer units
The commander is provided with an independent optic, that can traverse 360°. The sight has an elevation up to +60° and maximum depression of -15°. Like the gunner's sight, the new commander's optic includes different magnification levels, a thermal imager and a laser rangefinder with a range of up to 10,000 metres. The RMS stabilization error of the optic is also claimed to be just 0.1 milliradian. The new fire control system also includes digital displays for the operators, a new ballistic computer connected to several sensors - including a cross-wind and a roll sensor - and an automatic target tracker, which has an accuracy of 0.05 to 0.1 milliradians. According to KBP Tula, this is between three to six times the accuracy a human operator can achieve when trying to track a target with the BMP-2's or Berezhok's systems. The new stabilizers fitted to the main gun have a maximum error of 0.3 to 0.5 milliradians and allow a maximum weapon laying speed of 35 to 60 degree per second.

The Berezhok turret carries 300 grenades, 200 rounds of main gun ammo, 8 ATGMs and 2,000 rounds for the MG
Aside of the coaxial 7.62 mm machine gun (MG), a 30 mm automatic grenade launcher (AGL) with vertical stabilization has been added to turret. This weapon is fixed to the turret rear and therefore cannot be turned independently (unlike pintle-mounted weapons or remote weapon stations). The addition of the AGL is rather odd, given that the 2A42 main gun of the Berezhok combat module should provide similar anti-infantry and anti-structure performance, but it seems likely that the AGL was added for some enhanced indirect fire options against infantry. A total of 300 grenades for the grenade launchers and 2,000 rounds of 7.62 mm ammunition are carried inside the vehicle. The 2A42 autocannon is commonly loaded with 160 anti-armor rounds (most likely AP, APDS or APFSDS) and 40 rounds of high-explosive incendiary ammunition.

The Kornet-EM ATGM has a tandem warhead with high armor penetration
On the left and the right side of the turret, dual-launchers for the Kornet anti-tank guided missile (ATGM) have been added. A total of eight missiles are carried inside the upgraded BMP-2 vehicle, four of which are ready to fire. The launcher is compatible with the 9М133-1, 9M133F-1, 9М133M-2 and 9М133FМ-3 Kornet missiles. The 9M133-1 is fitted with tandem shaped charge warhead to combat heavily armored vehicles such as main battle tanks (MBTs) even along the frontal arc. The armor penetration ranges from 1,000 to 1,200 mm into steel, its tandem charge warhead can defeat explosive reactive armor (ERA). The 9M133F-1 is a variant fitted with a thermobaric (fuel-air) HE warhead that is equivalent to a 10 kilogram TNT charge. Both these missiles have an effective range from 100 to 5,500 metres.
The 9M133M-2 is an improved version of the Kornet ATGM, which is also known as Kornet-EM. It has a longer range - capable of reaching targets up to 8,000 metres - and features an improved tandem charge warhead with a penetration of up to 1,300 mm into armor steel. A thermobaric warhead option is also available.
The 9M133FM-3 missile is fitted with a proximity fuze and a larger rocket engine. Its main purpose is to engage aerial targets such as helicopters up to a range of 10,000 metres. A shaped charge warhead option is not available, the missile is always fitted with a slightly smaller thermobaric warhead equal to a 7 kilograms TNT charge. The 9M133FM-3 missile is either fired in a single shot mode or as a salvo of two in an attempt to overcome active protection systems (APS).

The BMD-2 will receive the smaller Bereg turret with only a single missile launcher and without AGL
The BMD-2 will be fitted with the smaller Bereg combat module, which is required to due to the size and weight limitations of the air-mobile vehicle. The Bereg turret has a weight of less than 1.8 metric tons, while the Berezhok turret has a weight of up to 3.25 metric tons. The weight reduction is only possible, because the Bereg is a one-man-turret, the vehicle commander sits in the hull.
Therefore the Bereg doesn't feature an independent optic for the commander, being unable to carry out missions in the hunter-killer mode - otherwise the fire control system seems to be identical, it also features a cross-wind sensor, a roll sensor, modern stabilizers and an automatic tracking unit. The turret is only fitted with a single dual-launcher for Kornet ATGMs and the total missile stowage is reduced from eight to two. The 30 mm 2A42 autocannon remains the main armament, but no 30 mm AGL is added to the turret rear; however the Bereg turret has 300 instead of 200 rounds of main gun ammunition ready to fire.

The latest version of the CV9030 is the only variant with hunter-killer capabilities
The upgrades of the BMP-2 and BMD-2 enhance the capbilities of the obsolete baseline vehicles by a considerable amount. The original vehicles were rather useless against their more modern Western counterparts, which due to their thermal imagers and digital fire control systems had a big advantage over the BMP-2 and BMD-2. In various aspects these upgraded 1980s IFVs can even outperform much more modern vehicles - for example the commander's panoramic sight of the Berezhok turret is an advantage compared to vehicles such as the ASCOD Pizarro/Ulan, the Marder and all currently operational CV90 variants excluding the latest Norwegian models. Its long range, high penetration power and the ability to target helicopters (with the 9M133FM-3 missile) make Kornet a much better missile system than the older missiles used on some NATO IFVs such as MILAN and TOW. The inclusion of an automatic target tracker in the FCS is a further perk of the Berezhok and Bereg turrets.
However just changing the turret doesn't remove all shortcomings of previously obsolete vehicles such as the BMP-2 and BMD-2. Unless Russia also contracted upgrades for armor protection - the basic BMP-2 isn't even protected against 12.7 mm and 14.5 mm heavy machine gun ammunition at the sides - and mobility, these vehicles will still suffer from various drawbacks.

Wednesday, September 20, 2017

Czech Army prefers Puma, searches T-72 replacement and miscellaneous

In August an article on the Czech IFV program was published here. A long period of writing and more recent news from the Czech Republic have made the speculation and information on the possible contenders outdated. The Czech government asked a total of nine contenders to participate in the tender for the BMP-2 replacement. Apparently neither the Šakal IFV or the Wolfdog were considered by the army as proper replacement for the BMP-2s. The following IFVs were seen as possible replacement, which is why the manufacturers were invited to participate in the bidding process for the contract:
  1. BAE System's CV90
  2. General Dynamics European Land Systems' (GDELS) ASCOD 2
  3. The Puma from PSM, a joint venture between KMW and Rheinmetall
  4. Rheinmetall's Lynx
  5. The PMMC G5 from the German manufacturer FFG
  6. Otokar's Tulpar
  7. The Kaplan-20 from FNSS (FNSS is a joint-venture by BAE Systems and Nurol Holding)
  8. The Namer developed by the Israeli Ordnance Corps
  9. Oto-Melara's Dardo
The Italian and Israeli companies did not respond to the Czech request - or at least not until the deadline was over. It must be noted that both the Dardo infantry fighting vehicle (IFV) and an IFV variant of the Namer probably would have lost due to their performance characteristics not matching the standards set by the competitors. By current standards, the Dardo has poor armor, lacking firepower - only a 25 mm chaingun plus outdated TOW missiles - and lower mobility than the other options, while the Namer is too heavy and is fitted with an outdated powerpack, that delivers not enough horsepowers while consuming more fuel than more recently developed diesel engines. The fact that air-transportability and the compability with existing infrastructure might be factors for the purchase of a new IFV makes the Namer a very unattractive option.

The Namer was recently showcased with a new unmanned turret
It also should be noted that at the time of the tender request, the latest version of the Namer fitted with an unmanned turret had not been presented. At that time the only available infantry fighting vehicle configuration of the Namer was limited to a few prototype vehicles fitted with the Samson Mk 1 remote weapon station (RWS). This RWS is also used on the Czech Pandur IIs and features a 30 mm Bushmaster II autocannon, a machine gun (MG) and a launcher for two Spike-LR anti-tank guided missiles (ATGMs). Using this RWS instead of a proper unmanned turret has one major drawback: it is essentially unarmored and can in worst case be disabled by machine gun fire, because the ammunition feed system and parts of the electronics are not covered by any sort of armor.
On the first of August the IDF presented a new IFV version of the Namer fitted with an unmanned turret specifically made for the vehicle. This infantry fighting vehicle would have been far better, but probably was still in development at the time of the request. The turret is not an off-the-shelf option from Elbit Systems or Rafael, but incorporates technologies from multiple companies and is designed by the IDF. It features two set of Elbit System's COAPS sights, the Trophy-MV active protection system from Rafael - a lighter variant of the Merkava's APS known as Trophy-2 during the development - and a relatively wide variety of armament, consisting of a 30 mm Bushmaster II chaingun, a coaxial machine gun, a pop-up ATGM launcher and an internally mounted 60 mm mortar.

The G5 PMMC was rejected by the Czech Republic
Based on the technical specifications of the vehicles, the G5 protected mission module carrier (PMMC) was eliminated before the actual testing of the offers started. It's technical characteristics - the low supported maximum weight of only 26.5 metric tons, the small 560 hp engine and the limited protection options - were too much to be compensated by the lower price point. FNSS' Kaplan-20 "new generation" armored fighting vehicle (NG-AFV) suffered from the same issues, but it also came with a big pile of potential political troubles due to the relations between the EU and Turkey being on a historically low level. Based on the latter factor, the Tulpar IFV from Otokar, which based on weight, armament and protection level might have been considered a serious alternative to the offerings from the established manufacturers, was eliminated together with the Kaplan-20 from the Czech tender.

A Puma IFV climbs a slope during the Czech trials
This meant that only four vehicles - the ASCOD 2, the CV9030 (in two variants), the Puma and the Lynx - remain in the competition. These four vehicles were tested during a longer period of time in the Libava military facility in the Czech Republic. The trials lasted a total of six weeks and included firing trials, high speed driving on roads, traveling cross-country, climbing over walls/barriers, crossing ditches, wading through deep bodies of water and other tests. The first set of static and dynamic firing trials was done against targets in a distance of 700 m, 1,200 m and 1,800 m. An exact list of tests has not been published yet. The performance data of the vehicles was gathered before proper requirements were issued by the Czech ministry of defence, which is a rather uncommon approach.
According to Czech sources, the German Puma IFV indirectly won the evaluation of the Czech Army. While at the time of testing no official requirements were released - a suggestion for possible requirements was scheduled too be send by the army to the Czech ministry of defence (MoD) at the end of August - the Puma proved its "technological dominance" as described by a the Czech website Armádní Noviny. What exactly is meant with this statement is not exactly clear, aside of the Puma apparently outperforming the other contenders. As stated by German sources, the Puma IFV managed to hit "by far" the highest number of targets during the firing trials. It seems likely that the superior level of protection of the Puma is also part of this "dominance", but it is possible that the high power-to-weight ratio in combination with the advanced hydropneumatic suspension allowed the Puma to outrun the competition during some of the mobility trials - in tests by the engine manufacturer MTU, the Puma outrun a Leopard 2 tank.

Puma IFV wading through water as part of the trials
Regardless of what the exact reasons for the Puma outperforming the other vehicles were, the Czech MoD has stated interest in buying this infantry fighting vehicle rather than one of the cheaper offerings, according to Czech websites Armádní Noviny and E15.cz. The Puma is the favored solution, but due to its high unit costs a vehicle with rubber band tracks is also considered as option; given that all three other vehicles - ASCOD 2, CV90 and Lynx - were presented with rubber band tracks, it is not clear what other IFV is meant - in theory one could also create a lighter variant of the Puma with rubber band tracks. A first meeeting was held between the German PSM and the Czech state-owned company VOP CZ to discuss details on a possible Puma purchase. VOP CZ had made agreements with all of the four final bidding companies for a possible deal regarding local assembly and production of components. Aside of PSM, the companies KMW, Rheinmetall, Hensoldt Optronics, MTU Friedrichshafen, Jenoptik Advanced Systems and Dynamit Nobel Defence were also taking part in the talks. PSM supposedly already showed technical documents regarding possible non-IFV variants of the Puma suited for the Czech Army.
The Czech  MoD has allocated a budget of up to 50 billions koruna (€1.916 billion) for the purchase of 210 new IFVs and other vehicle variants based on the same chassis with an option to later order a further 100 vehicles. This would be enough to buy 210 Puma IFVs for the cited unit price, about €7 million according to the Czech sources, but only half the bugdet is actually meant to be used on purchasing the new vehicles. The other half of the budget is meant for logistics, infrastrucutre and training, i.e.it is meant for purchasing spare parts and simulators, setting up training facilities and repair plants. This means currently the Puma is too expensive!

Puma production line in Germany
In order to deal with the high unit costs, different possibilities are examined. PSM is offering to set up a full production line in the Czech Republic, which would reduce costs (e.g. the wages in Germany are on average more than 3.5 times as large as the ones of Czech workes) and would create jobs, resulting in people paying more taxes in the Czech Republic and thus indirectly reducing costs further. All Puma IFVs for the Czech Army could be made within the Czech Republic and if desired even some of the components for the German Army vehicles could be manufactured there - currently some of the cables and sensors for the fire supression system are made in this country already.
Alternatively there is an option of getting financial support for the arms purchase thanks to the new EU Defence Fund, which were created in 2017 after first plans were made a year before. This fund has an annual size of up to €5.5 billion and can be used for research and development, aswell as arms acquisition; EU member countries can request support and submit a project, which then might receive additional money from the fund. Based on speculations on Czech-language websites, it seems that this money can only be spent on equipment from European companies - but all four companies (even GDELS in Madird) - have their headquarters in EU countries.
Last but not least, there are suggestions for buying two different vehicles at once: the Puma would then serve as IFV only, while according to E15.cz either the ASCOD 2 or the Lynx would be used for the support vehicle roles, eg. as an armored ambulance vehicle (MedEvac), as a command post vehicle, as a reconnaissance vehicle and as an armored recovery vehicle (ARV). The drawback of this approach would be the added logistics, infrastucture and training necessary for operating two new vehicle types.

3D model of the Puma's turret with MELLS launcher
In theory would be possible to make all vehicles in Germany, because the initial order for the German Army will be finished in 2020, the same year when the production for the new Czech infantry fighting vehicle is planned to start; by 2024 all new Czech IFVs should be finished according to the army's demands. In such a case the German production lines would never be closed and just continue making the hypothetical Czech Puma model, which is expected to feature several modifications compared to the German varaint (such as local radio units, a machine gun already in use with the Czech Army and other minor differences at least).
While the German Army is expected to place an order for a second batch of Puma IFVs, there is currently no projected schedule for this to happen. The German federal audit office has recommended to wait until the vehicles meet all of the original user requirements, of which many still have to be met - such as the integration of the MELLS Spike-LR launcher and TSWA secondary weapon, which has recently been contracted. Until the second batch is finished, the Marder will continue to soldier on in the German Army side-by-side with the Puma. Therefore up to 200 Marder IFVs will be upgraded with a new night vision system for the driver, a third generation ATTICA thermal imager and a variant of the MELLS launcher for the Spike-LR ATGM.

The Lynx in an IFV version in the Libava military facility
Not mentioned by E15.cz as a possible secondary vehicle to serve alongside the Puma is BAE System's CV90 family of vehicles. In a previous post, we mentioned that this vehicle offers less payload in terms of supported weight and internal volume compared to the other options, which might be the reason for not considering the CV90 as platform. Alternatively it might be related to the procurement costs; while originally designed to be cheap and reliable - the key factors that lead to its widespread adoption, the each successive version of the CV90 became more expensive after adding more technology.
A further aspect speaking against the CV90 might be the lower involvment of the local industry. While always looking for local partners, BAE Systems had kept the production of the hull in its own facilities; only the turret and several sub-components can be made by the industry in the user's country. 

The hulls of all exported CV90s were made by BAE Systems
It is worth mentioning that the CV90 is a great vehicle, but its main advantage doesn't seem to be superior performance. The fact that is has been adopted in so many different countries shows the adaptability of the design, the many different versions also show that an evolution of the concept was possible. The CV90 started its success during a time, when all major Western militaries already had designed and adpoted their infantry fighting vehicles a decade before, thus not offering new high-end solutions too compete against the CV90 on the international market. Vehicles purely meant for export, such as the Panzer unter minimalem Aufwand created by Krauss-Maffei in the 1980s, the TH-495 from Thyssen-Henschel, various main battle tanks from Vickers (Vickers Valiant, Vickers Mk 7) and the GIAT (AMX-32 and AMX-40), have a tendency of not being purchased due to potential issues with logistics, training and the availability of spare parts.
Given the military cooperation between some of the user countries of the CV90, the purchase was to some extend an avalanche - one country choosing to adopt the CV90 resulted in the vehicle having an advantage in the next trials.

Swiss CV9030CH infantry fighting vehicles without applique armor
The CV90 was chosen Switzerland after a total of eight vehicles was considered for the Schützenpanzer 2000 program, three of which - the CV9030, the Marder M12 and the Warrior 2000 - were tested during a period of six weeks in the Alpine country. The Marder M12 was an upgrade to the German Marder IFV, based on a refurbished Marder 1A3 chassis fitted with the E4 turret from KUKA.While achieving a high level of protection and featuring an excellent turret, this offer suffered from the old hull not being upgraded otherwise - the relatively primitive protection solution - spaced steel armor - resulted in a weight of 34.1 metric tons - too much for the original powerpack to keep up with the Leopard 2 (a key requirement from the Swiss Army). A Marder M12 with more powerful engine and/or more weight efficient ceramic armor would have been a better option.

CV90, Warrior 2000 and Marder M12 in the Switzerland
The CV90's hull was received with mixed feelings, some aspects were considered positive, while others were seen negatively. The small hull size was considered as advantageous for survivability - a low profile is less likely to be spotted and less likely to be hit. Also the separation of fuel from the crew compartment, not found on the other offers, and the easy to adapt add-on armor was seen as an advantage of the CV9030. This add-on armor consisted of MEXAS (ceramic) composite modules with a thickness of up to 70 mm (depending on location) and could be mounted within a few hours. Last but not least the running gear with seven roadwheel pairs (instead of six) proved to provide better in deep snow.
The small size of the hull however meant that the vehicle was cramped and ergonomics were poor compared to the Marder and Warrior variants.
The turret of the CV9030 was however the worst one offered, resulting in lower than average firepower. The problems were mostly related to ergonomics and the fire control system (FCS), which wasn't fully digitized. The FCS did not include an independent optic for the commander or a proper auxiliary sight, while relying on a single, outdated first generation thermal imager for night vision.

The Warrior 2000 IFV featured a redesigned hull mated with a turret manufactured by Delco
The Warrior 2000 performed best in the Swedish trials. Its turret - delivered by the US company Delco - was the most advanced turret on offer. Not only featuring modern sights for both commander and gunner, it also included advanced software functions such as fully automatic target tracking. The basic structure of hull and turret of the 31 tons heavy vehicle was made of aluminium, resulting in a relatively light weight given its size. Additional spaced armor - possibly simple steel - is bolted ontop of the aluminium construction for an increased level of protection. The Warrior 2000's larger size resulted in the best ergonomics of all tested vehicles.
Being a new vehicle design - based only to a very limited extend on the British Warrior IFV - the Warrior 2000 suffered from some teething issues which negatively affected the reliability of the vehicle. The manufacturer of the most advanced IFV offered to Switzerland - the British company GKN - told the Swiss Army that all these issues could be fixed, but sold its defence subsidiaries to Alvis plc, the same company that owned the CV90-maker Hägglunds and later became part of BAE Systems. Alvis plc had not much motiviation to keep two different product lines for the IFV market, which ultimately resulted in the end of the Warrior 2000.

The Swiss Army opted for the CV9030 because it offered the best price-to-performance ratio, not because it was the most capable vehicle! Unsatisfied with the original CV9030 tested by the military, a number of changes were demanded before purchasing the CV9030CH. The original engine was replaced by a larger 670 hp Scania engine meeting the Euro II emission standard for trucks, while the hull was enlarged: the hull roof at the dismount compartment was raised by 100 mm, while the vehicle was also stretched by 200 mm in order to reduce the issues with ergonomics. The rear doors were replaced by a single rear ramp for easier entry and exiting of the vehicle by the infantry squad. A second-generation thermal imager was installed into the gunner's sight instead of the outdated previous model. The FCS' computer system was exchanged and local equipment (machine guns, radios, smoke grenade launchers) were fitted to the IFV. Only forty armor kits were purchased, leaving the majority of the vehicles unprotected against medium calibre ammunition.
Further changes were planned - such as adopting a separate optic for the commander for hunter-killer capability - but deemed to be too expensive.

In 2002, Germany tested an ímproved variant of the Swiss CV9030CH, which was fitted with a more extensive applique armor kit including a mine protection plate. Germany had halted the development of the next-generation NGP vehicle family due to the recent developments in assymetric warfare and international peace-keeping/peace-making operations. The NGP was too heavy for air-lifting, being designed with a weight ranging from 51 metric tons (in the base configuration) up to 77 metric tons with a full armor kit.
Several options were evaluated, but in the end the CV9030 was rejected, ending up on the last place of all tested vehicles! The German Army considered the poor protection against anti-vehicle mines, the high weight in relation to its protection level and the low growth potential of the chassis to be key factors speaking against buying the CV90. Because none of the vehicles met the German requirements, the Neuer Schützenpanzer project was started, which reused some of the technologies and concepts of the NGP; later it was renamed multiple times - Panther, Igel and finally Puma.

The CV90 offered for the Scout-SV program
Likewise the UK tested a variant of the CV90 for the Scout Specialist Vehicle (Scout-SV) program, which itself was part of the FRES project of the British Army. BAE Systems decided to reduce the overall size of the CV90 for the Scout-SV offer in order to implement a higher level of protection. According to claims from the manufacurer, this variant of the CV90 met the British protection requirements and had a level of mine protection "equivalent to a MBT". The United Kingdom prefered to buy a number of variants of the ASCOD 2 from GDELS, despite BAE Systems being a local company - the  larger size and greater payload of the resulting vehicle being a key factor.

Why this short recapitulation of the times the CV90 was not chosen? Because its widespread adoption makes some people believe that the vehicle is inherently superior to all other options and buying something else must be related to lies and corruption. BAE Systems created a number of presentations - both in the Czech and in the English language - on the development of the CV90, its advantages and why the Czech Army should buy it instead of the other vehicles. These presentations were available in BAE Systems' online resource center, but after they have been posted in multiple forums, BAE Systems added a password protection for these files. They might not have been meant to be available for the public.

According to the documents, the fifth-generation of the CV90 is protected according to STANAG 4569 level 6 (30 mm APFSDS from 500 metres distance) ballistically and has mine protection meeting the STANAG 4569 level 4a/4b standard - a 10 kg TNT charge located under the track or the hull; this is currently the highest standardized level of mine and ballistic protection. Protection against shaped charges such as RPGs, additional roof armor aswell as active protection systems are available, but not fitted to the CV9030CZ in the Czech trials. 
According to the documents from BAE Systems - the manufacturer of the CV90 - the older versions of the vehicle provide ballistic protection equivalent to STANAG 4569 level 5 "plus" or "plus-plus", while the CV90 Mk III is the only older variant with mine protection, reaching the STANAG 4569 level 3a/3b - this is an expected level of mine protection for such a vehicle, it's the same level of mine protection achieved on the Marder 1A5 IFV and believed to be also equivalent to the that of the Bradley with the BUSK. 
While not related to the Czech IFV procurement plans, the problem remains that there is no official, standardized data for the protection levels "level 5+" and "level 5++". All that is confirmed, is that the ballistic protection requirements for STANAG 4569 level 5 are met and exceeded. A further problem is that there are different volumes of STANAG 4569  and the corresponding AEP-55 standard for the testing procedures. The earliest edition of STANAG 4569 required only protectiton against APDS in order to reach the level 5 of ballistic protection and didn't feature a level 6. The later revisions require protection against APFSDS ammo aswell. So what does "level 5+" and "level 5++" mean? Does it relate to a requirement for protection against 25 mm APFSDS ammo, because the updated standard didn't exist back then? Does it relate to a requirement for protecting against 30 mm APDS ammo or APFSDS ammunition? What exact 30 mm calibre would that be -  30 x 165 mm, 30 x 170 mm or 30 x 173 mm APFSDS? What is the range and the impact angle? Is the STANAG 4569 level 6 simply not mentioned, because it didn't exist at the time these vehicles were designed?

STANAG AEP-55 required armor coverage by protection level
One example of a vehicle exceeding STANAG 4569 level 5, but failing too reach the level 6 requirements for ballistic protection is the Austrian Ulan IFV, a version of the ASCOD with MEXAS applique armor. This vehicle is protected against 30 mm APFSDS of unknown type fired from a distance of 1,000 metres along the frontal 30° degree arc - so essentially +15° and -15° from the vehicle's centerline. While in this case the difference in frontal protection might not be very much, the difference in required side armor is much bigger. Modern 30 x 173 mm APFSDS rounds from manufacturers such as Nammo and Rheinmetall can perforate in excess of 110 mm steel armor at 1,000 metres distance, the estimated penetration at 500 metres would be somewhere in the range of 120-130 mm steel armor. A 29 mm steel plate is enough side armor to stop a 30 x 173 mm APFSDS at a range of 1,000 metres and an impact angle of 15° - effective plate thickness will nearly quadruple at this angle. STANAG 4569 level 6 requires however protection against a 30 x 173 mm APFSDS at at a range of 500 metres and an impact angle of up to 30° - therefore one needs at least a ~60-65 mm thick steel plate or more than twice as much side armor to meet the NATO STANAG requirements! In the end both BAE Systems and the Norwegian Army claim that the latest Norwegian model - on which the CV9030CZ is based - features upgraded armor protection over previously existing CV90 variants and has the highest level of protection of the vehicle versions. Photographs of the fifth generation CV90 and previous models show increased armor thickness - at least at certain places.

The T-72M4Cz is due to be replaced by a new tank
The new Czech IFV is to be manufactured in the timeframe from 2020 to 2025 - in this period of time, the Czech military also plans to replace the T-72M4Cz, probably the most capable T-72 upgrade operational within NATO, with a more capable solution in reponse to the latest Russian tank developments. According to Czech-language sources, there are only two real contenders: the Leopard 2 and the Israeli Sabra tank. The M1A2 Abrams, the South-Korean K2 Black Panther and the Japanese Type 10 main battle tank (MBT) are all in production, but too expensive - the Abrams consumes too much fuel and spare parts, while the huge physicial distance to the Asian countries would negatively affect the price of spare parts and training exchanges. The Italian C1 Ariete, British Challenger 2 and French Leclerc tanks are all out-of-production and made in very limited quantities only.
 
New build Leopard 2 tanks are likely too expensive for the Czech Republic
 The Leopard 2 should be considered the favorite option for a new MBT. The tank is in widespread use and a large number of companies - such as KMW, Rheinmetall, RUAG and Turkish Aselsan - are offering different types of vehicle upgrades. The Leopard 2 has access to various types of technology and can be offered with a number of unique advantages over the Sabra and other existing tanks, such as a long-barreled L55 smoothbore gun from Rheinmetall. With three out of the four neighbour countries operating the Leopard 2, adopting the Leopard 2 MBT would be advantageous for logistics.
However there is a big problem with funding the purchase of Leopard 2 tanks; buying completely new tanks is too expensive. But even buying older tanks and upgrading them to a decent configuration - a 1980s Leopard 2A4 will provide no real performance boost over the T-72M4Cz - might be rather costly. Czech sources speculate about using the EU Defence Fund for purchasing the tanks.
Only about a hundred tanks in a decent condition are left on the market, but aside of the Czech Republic, the militaries of Bulgaria, Croatia and Poland are interested in buying them.This could result in a bidding war, driving prices higher. Alternatively it could be possible to lease Leopard 2 tanks from another European country, but the question remains from whom the tanks would be leased. The neighbours Germany and Poland are increasing their tank fleets, thus unlikely to hand over tanks to the Czech Army.

The M60T is based on the Israeli Sabra upgrade
The Israeli industry was expected to offer the modern Merkava 4 tank, but decided - after investigating the Czech requirements and operational environments - too offer only the Sabra tank, supposedly in its latest version. The Sabra tank is an upgrade of the obsolete M60 tank, which has been adopted in Turkey as the M60T. It must be noted that while the Merkava is only operational in Israel, it has been offered to multiple other countries in the past decades, including Switzerland (early variant - either the Merkava 1 or 2) and Sweden (Merkava 3 during the 1990s); Sweden had very good relations with Israel, sharing tank technology in some cases; e.g. a Swedish delegation was insturcted on the modular armor concept of the Merkava 3, but the tank was still rejected for not being competitive compared to the European and US offers.
The Sabra is a cheaper option compared to the Leopard 2, which might provide beneficial. However due to the fact that it is made by Israeli companies, it might not be possible to use EU money from the defence fund for purchasing the tanks. Depending on variant, the Sabra can be better than the Leopard 2 - at least the old 1980s models without extensive upgrades - in terms of firepower and potentially also in regards to armor protection. It is unlikely that the Sabra can compete with more modern Leopard 2 versions in regards to performance in any important category. The upgraded M60 main battle tank is protected by hybrid armor - a combination of explosive reactive armor and passive composite armor - and sometimes also by the Iron Fist hardkill active protection system from Israeli Military Industries (IMI). The gun is replaced with a 120 mm smoothbore gun, while the Knight III fire control system from Elbit Systems allows the vehicle to be used at night, fire on the move and operate in a hunter-killer configuration. The latest version of the Sabra - the Sabra 3 - is supposedly  fitted with armor derived from the armor modules fitted to the latest variants of the the Merkava series.

The choice of the M60 as base for the Sabra upgrade is questionable. On one hand, the M60 tank is widespread and rather cheap - that's good; on the other hand however the M60 is probably one of the worst tanks for upgrading: it is already rather heavy thanks to the use of thick, but weight-inefficient steel armor, and it is one of the tallest main battle tanks, therefore installing applique armor yields less gain in protection. The tank also lacks proper compartmentation, storing the ammo inside the crew compartment without blow-off panels. The mobility of the Sabra tank is worse than that of a Leopard 2 or other modern MBT due to its poor suspension and small 1,000 hp engine, which isn't really enough for a 60 ton tank.

A light tank variant of the ASCOD 2 offered by GDELS

A further option that is being considered by the Czech Army is buying a light/medium tank based on an IFV chassis. The CV90105 and CV90120-T are well known examples of such vehicles, but there also have been different light tank variants of the ASCOD design. The Lynx could be used as a medium tank according to Rheinmetall representatives and as demonstrated by various Marder light/medium tank projects - the Marder medium tank offered to Indonesia is a prime example. Retired US Colonel MacGregor is suggesting a medium tank variant of the Puma (or an equivalent IFV) for his concept of a Reconnaissance Strike Group; he claims that the possibility of creating a Puma armed with 120 mm smoothbore gun was confirmed by the manufacturers.
The big problem is that such a light/medium tank is not a one-to-one role replacement of the T-72M4Cz; none of these vehicles has enough frontal armor to withstand impacts of large calibre APFSDS ammunition or tandem charge ATGM warheads. In so far buying such a vehicle requires changes in the training and doctrine.


Meanwhile news websites have reported more on the Polish IFV project, after various options were showcased at the MSPO 2017. According to Jane's IHS, the basic steel hull of the Borsuk IFV offers ballistic protection according to STANAG 4569 level 2 only - so essentially the same level of armor protection as the old BMP-1, that is meant to be replaced by the Borsuk. When fitted with ceramic or composite armor modules, the hull protection is boosted to level 4 ballistic protection - which is given the weight of about 30 metric tons a rather unimpressive - some 20 tons vehicle reach this level of protection, but the focus on IED/mine protection and amphibious requirements take their toll from the Borsuk's design. The Borsuk and the older Anders IFV both are fitted with hydropneumatic suspensions based on the hydrops from the British company Horstman. 
While being developed following a contract of the Polish Army, it is not decided that the Borsuk will actually enter service, which is why the Anders, the ASCOD 2, CV90 and Lynx are apparently all also offered to the Polish military.